Service 02
Made-to-order kitchen worktops
We help you choose the material for your worktop, measure it precisely on the installed units and fit it so that it suits the kitchen.
The worktop is the most exposed part of a kitchen: you chop on it, put pans down on it and wipe it several times a day. That is why we advise on the material according to how you use the kitchen, not only how it looks. Wood, laminate, granite, marble, concrete and Kerrock differ in durability, care and price, and we explain those differences before you decide.
A worktop is best measured once the base units are in place, so that the actual dimensions of the walls and corners are taken into account. We prepare wooden and laminate worktops to these measurements and fit them ourselves. For granite, marble, concrete and Kerrock, we help you choose the material, measure the kitchen and make sure the worktop matches the units precisely.
Kitchen worktops
What we pay attention to
Thickness, edges and joints
Thickness changes how a kitchen looks: a thin worktop feels lighter, a thick wooden one more substantial. The edge can be square or rounded. In L-shaped kitchens we agree in advance where the joint between two boards will go, so that it is not right next to the sink, where water would strain it most.
Cut-outs for sink and hob
For wooden and laminate worktops, we cut the openings for the sink and hob to the manufacturer’s instructions, so we need the exact appliance models before preparing the worktop. The edge of each cut-out must be sealed against moisture, otherwise the chipboard under the laminate will swell by the sink.
Caring for each material
A wooden worktop needs oiling from time to time. Laminate is easy to clean but does not cope with hot pans or water at the joints. Granite is hard and heat-resistant, while marble is sensitive to acids such as lemon juice and vinegar. Kerrock can be sanded back, but put hot pans on a trivet.
How we work
From the first measurement to fitted furniture.
A clear process means fewer surprises. At every step you know what comes next.
- 01
Call and consultation
Call or email us and briefly describe what you have in mind. We arrange a visit to see and measure the room.
- 02
Measuring and proposal
We measure the room precisely, choose materials and fittings with you and prepare a proposal with a quote.
- 03
Making
We make the furniture to the agreed plan and measurements, in the materials you have chosen.
- 04
Fitting
We deliver, install and adjust the furniture. At handover we go over every detail together.
FAQ
Frequently asked questions
Which worktop material is the most durable?
Of the materials listed, granite is the most resistant to heat and scratches. Wood is softer, but it can be sanded and re-oiled, while laminate is a practical choice on a smaller budget. Which material is right for you depends on how you cook and how much care you are prepared to give the worktop.
Can you replace just the worktop and keep the rest of my kitchen?
Yes, if the units are sturdy and in good condition. When we visit, we check the carcasses and measure the existing kitchen. The sink and hob have to be disconnected and then reconnected after fitting, so we agree on this in advance. Call us on 031 882 452.
Is a wooden worktop suitable next to the sink?
Yes, if it is properly protected and regularly maintained. We oil the wood and give the edge of the sink cut-out extra protection, and water by the sink is best wiped up straight away. When the surface darkens or turns rough, it can be sanded and re-oiled, which is not possible with laminate.
All services
Related services
01
Custom kitchens
Made-to-measure kitchens in solid wood, chipboard or MDF, built for your room and the way you cook.
About this service
03
Kitchen renovation
Renovating your existing kitchen: new fronts, handles, runners or worktop, when the carcasses are still in good condition.
About this service
11
Furniture assembly
Furniture assembly and installation, including shop-bought pieces, dismantling, transport, and kitchen assembly and connection.
About this service